UPS-PLUS project

Project title:

Process optimisation and valorisation of combustion by-products in transition to circular economy (UPS-Plus)
 
 
Project director:  
Sylwester Ka lisz 
PhD, Associate prof. at SUT  
 
 
Location of project implementation:
Silesian University of Technology, Faculty of Energy and Environmental Engineering
 
 
Source of funding:
Foundation for Polish Science
TEAM-TECH Core Facility

 

1/2

The main object of the project is the realization of circular economy ideas by optimising the combustion process in order to obtain combustion by-products likely to valorisation and usable in industry. Optimalisation of low quality solid fuels combustion (e.g. biomass or refuse-derived fuel) will be based mostly on upgrading fuel properties with additives, especially connected with slagging, fouling and high temperature corrosion and on reduction of harmful compounds (e.g. NOx, Hg, HCl, HF, NH3). The purpose of the optimalisation is to produce specific by-products subsequently subjected to thermal and chemical functionalization resulting in obtaining useful materials, e.g. geomats, insulations or sorption medium. Project objectives will be carried through usage of innovative, multifunctional Core Combustion Facility (CCF) – semi-technical boiler stand allowing to develop research service concerning modification of combustion process in order to receive most useful by-products.

Core Combustion Facility (CCF)

 

1 - Module of vibrating grate or fluidized bed reactor 

2 - Furnace pass

3 - Radiant test block   

- Heated radiant test block

- Horizontal pass

6,7 - onvective test block

- Deposition and corrosion probes flange

- Ash hoppers

10 - Safety valves

11Vertical pass

12 - Air fan

13 - Valves for air cooling

14 - Flow meter

15 - Air heater 

16 - Air cooling distributor

17 - Flue gas cooler

18 - Flue gas cleaning

 

1/1
1/1

PROJECT WORK STRUCTURE

 

  • WP 1 - OPTIMISATION OF COMBUSTION PROCESS

 

Work package 1 aims to tackle the major hazards associated with combustion of low quality solid fuels due to its properties. The combustion process will be optimised in terms of fuel pre-treatment thanks to modifying its composition by a various kinds of additives and by additive in-furnace injection.

 

T1.1 – Fuel and fireside additives  

T1.2 – Fouling and slagging control

T1.3 - Corrosion control

T1.4 - Gas and solid emission control

 

 

  • WP2 - VALORISATION OF COMBUSTION BY-PRODUCTS

 

Work package 2 aims to develop methods of combustion by-products valorization and functionalization in order to obtain materials and products usable in industry.

 

T2.1 - Thermal and chemical functionalization of combustion by-products

T2.2 - Ammonia removal from fly ash

T2.3 - Mercury capture and control

  • WP3 - PROOF OF CONCEPT

 

As part of work package 3, proof of concept will be performed consisting in predicting the properties of regranulates based on polyethylene and polypropylene produced from a non-homogeneous stream of post-consumer raw materials modified with by-products of combustion (UPS) based on an artificial neural networks model and research on a technical scale.

The effect of the work package 3 will be the technology that allows the production of several qualified regranulates from post-consumer materials with the addition of fillers based on UPS and post-consumer materials based on UPS modified with nanostructured materials such as halloysite.

 

 

 

kmiue.png

CONTACT US

kmiue.png
politechnika_sl_logo_pion_pl_rgb.jpg

SKONTAKTUJ SIĘ Z NAMI